Updating software on Yarus C2100 and Yarus M2100

Warning! Before installing the new version of software, you need to delete an old one.

Deleting old Software

Step 1.

Turn on the power of your payment terminal.

Step 2.

Go to the system menu––holding down the key until the moment, when YARUS logo will disappear. POS MANAGER will be opened.

Choose section Очистка/Удаление - moving by menu items is carrying out with the help of keys  and . To enter uppercase letters, you must press one time the key , to enter the lowercase letters – you must press two times the key ;

Choose section Удаление программ - delete all the programs, with the exception of eftspooler, eftmsrdd, eftlib;

Choose section Удаление данных - delete all data in the catalogue /usr/unsign;

Step 3.

Reboot your terminal.

Step 4.

Connect a terminal to COM-port by RS-232 cable which is connected by COM1.

Step 5.

Connect power of your terminal.

Updating Software

Important! Software update can be done by terminal’s system menu or by HyperTerminal.

Updating Software with POS MANAGER

Step 1.

Go to the system menu – holding down the key  until the YARUS logo will disappear. POS MANAGER menu will be opened.

Step 2.

Choose section Обновление ПО.

Step 3.

Choose section Ручная настройка.

Request Code for M2100 should be:

  • 1009 (If using Bank's application without Cash register machine), press the key ;
  • 1010 (If using Bank's application with Cash register machine with eftkkm), press the key ;

Request Code for С2100 should be:

  • 1004 (If using Bank's application without Cash register machine), press the key ;
  • 404 (If using Bank's application with Cash register machine with eftkkm), press the key ;
  • 1000 (If using Bank's application with Cash register machine with ecrterm), press the key ;

Step 4.

Choose protocol mfh;.

Step 5.

Choose speed 115200

On the payment terminal's display will be information about update.

Updating software with HyperTerminal

Step 1.

Start HyperTerminal utility from the menu Start -> Programms -> Standart -> Connect -> HyperTerminal

In the menu Файл choose Новое подключение command.

Step 2.

In the window Описание подключения, in the area Название enter a name of the connection

In the area Значок choose  and press ОК

Step 3.

In the window Подключение, in the area Подключаться через: set COM-port number of your PC. Software will be loaded through this port. Press the ОК button.

Step 4.

In the window Свойства: (Your COM-port number), in the area Управление потоком: fill next lines:

  • Скорость (бит/с) (Speed): 115200;
  • Биты данных (Bits): 8;
  • Четность (Parity): нет (no);
  • Стоповые биты (Stopping bits): 1;
  • Управление потоком (Flow control): нет (no);

Then press the ОК

Important! If connection is successful, the window of HyperTerminal will be look like this:

Step 5.

Then you need press the Отправка файла  button on the task bar:

In the window Отправка файла, set the name Имя файла: and by pressing the Обзор button, choose the file with software:

Choose file with Software for YARUS with *.mfh file extension.

In the area Протокол must be: 1K Xmodem;

Now, press the Отправить button

Step 6.

You've started the process of sending file to the payment terminal.

Wait until the process of downloading and installing software in payment terminal will be over.